ROBUSTA-round column formwork: General information

  • for round colums formwork for exposed concrete quality
  • easy encasing
  • accurat joining together of the two casing halfs with centering pin
  • quick closing with D&W thread Ø 15 mm with wing nut
  • continuous rubber sealing at the longitudinal joint prevents leaking
  • new longitudinal profile enables the connecting of frame formwork for oval columns without special elements
  • working platform for concreting with side protection fitting to all formwork diameters without inconvenient adjusting works
  • diameters to rent beginning with 240 mm, from 250 mm to 1000 mm in a raster of 50 mm
  • degrees in length in 50 cm steps, max. standard length 3.50 m
  • floor hights up to 3.50 m to produce without lateral joints
  • concrete pressure max 120 kN/m²
  • special formwork and any intermediate sizes available on request for purchase
Download catalogue
 
 
Rundsaeule_allgemein.jpg

Round column formwork

 

Round column formwork

consisting of two halves
For purchase we also produce other sizes on request.

Item No. Diameter [mm]
4124.. 240
4125.. 250
4130.. 300
4135.. 350
4140.. 400
4150.. 500
4160.. 600
4165.. 650
4170.. 700
4175.. 750
4180.. 800
4185.. 850
4190.. 900
4101.. 1000
4111.. 1100
4112.. 1200

*the last two digits of the item no. give the length oft the formwork element.

Example: ....35 for the length of 3.50 m

TECHNICAL DATA

Accessories:

 

Working platform

consisting of 6 x security rails and platform

Item No. Weight [kg/unit]
419501 150,0

All parts of the working platform are also available separately.

TECHNICAL DATA
 

Adjustment pair of props

for fixing and adjusting the basic elements.
Each consitsting of 1 prop type M and 1 prop type S.
Double end hinge included.

Item No. Type fitting to
614130 I S + I M basic element 2.0 m
614236 I S + II M basic elements 2.50 - 3.50 m
TECHNICAL DATA
 

Push-pull-props Type M

three different sizes, admissible load from 27.8 to 13.4 kN

Item No. Type L* [m]
610130 I - M 1,74 - 2,94
610236 II - M 2,04 - 3,59
610343 III - M 2,44 - 4,24

*L = size from middle of boring hole to middle of boring hole without end hinges

TECHNICAL DATA
 

Standard end hinge

for outer and inner tubes, complete with hexagonal bolt and matching nut

Item No. End hinge for Distance of cleat a [mm]
610901 outer tube 60
610902 inner tube 50
TECHNICAL DATA
 

Push-pull-props Type S

three different sizes, admissible load from 43.5 to 9.5 kN

Item No. Type Length* [m] Ø [mm]
612440 4 - S 2,50 - 3,90 70,0
612660 6 - S 4,50 - 5,90 82,5
612876 8 - S 6,10 - 7,50 108,0

* L = size from middle to boring hole to middle of boring hole without end hinges

TECHNICAL DATA
 

Standard end hinge

complete with hexagonal bolt M 16 x 90 and matching nut

Item No. Weight [kg/unit]
612903 1,32
TECHNICAL DATA